LED CAMPING WORK LIGHT

INSTRUCTION SHEET

Price - Stock No 535 - LED Camping Work Light

Price - Stock No 536 - Additional LED Light Bars 

 

This versitile light is well suited for camping as well as an outstanding worklight.  The magnetic strip gives ease of mounting when in use.  The LED light bar measures 300mm x 20mm x 9mm and delivers 280 lumen.  When illuminated by 12 V the LED light bar draws 220 mA and therefore is consuming 2.64W.  The filal length of the main power supply cable is 4m.

 

 

MULTIPLE LIGHT STRIPS - UP TO 10

Up to 10 light bars can be connected as both ends of the light bar have power connectors.  Double adaptors and extension leads are supplied with each light bar.

CONSTRUCTION

Remove the LED light bar from its box and identify the following components:

Take the main lead and connect it to the figure 8 cable supplied with the kit - refer Tinning wire.  Ensure the striped wires are connected and the un-striped wires are connected:

 

CONNECTING THE ACCESSORY PLUG

Strip and tin the end of the figure 8 wire.  Ensure the polarity is correct by soldering the striped wire to the centre terminal and the plain wire to the side terminals.

CHECK THE POLARITY

Check the completed cable before connection to the light strip.  Plug the lead into a 12V socket.  Using a multimeter, ensure 0V is present on the outer of the plug and +12V is present on the inner of the plug:

 

FEATURES

Input voltage 9 - 30VDC (works on 12V and 24V systems)ml:namespace prefix = "o" ns = "urn:schemas-microsoft-com:office:office" />

3528 SMD LEDs (42 Pieces)

280 Lumens

90ºdeg; light output

3W power consumption

Cool white 5500K colour temp

Size: 300(L) x 20(W) x 9(H)mm

 

Contact CdS electronics

Home Page